Built to commercial surveyCan be ordered built to survey. Must be requested before construction starts, and is quoted separately.Hire and drive is Class 4Hiring boats to the public is a commercial class of its own. It normally needs survey, and must be specified up front.
Exemption 40 pathwayUnder 12m, so it may be eligible for commercial work in restricted C, D and E waters. Not for hire and drive.
Exemption 2 pathwayMay be eligible for club, volunteer or sheltered-water work with no certificate of survey.
Surveyor welcomeBring your own accredited marine surveyor to handover. We will accommodate an independent inspection.Eligibility depends on how and where the boat is used. Read the survey guide7.5mPro Fisher
The 7.5m Pro Fisher is a mono-hull with a fully enclosed driver’s cabin, purpose-built for offshore performance and dependable stability. It is plate-built from 5083 marine-grade aluminium — a 6mm bottom, 5mm topsides and a 6mm transom — and the hull is foam filled and water-tight for positive buoyancy.
Rocket launchers, gunwale rod holders, a 45-litre live bait tank, a self-draining deck, anti-slip marine flooring, a bilge pump and LED navigation lights are all standard, and a 350-litre fuel tank gives it serious offshore range behind a single outboard of 250hp to 350hp. A twin outboard transom configuration is available for offshore redundancy.
Electronics and safety gear — navigation systems, sounders, display screens, radar, antennas and solar components — are available as optional extras and are fitted and commissioned here in Australia before handover.
- 350 L fuel tank
- 45 L live bait tank with rod holders
- Cutting board
- Alloy fairlead and roller
- Cleats
- Anchor well
- Battery switch
- Rear fold-down seats × 2
- Boarding ladder
- Gunwale anti-slip pad
- Self-draining deck
- Bilge pump
- Water-tight hull
- Foam-filled hull
- Side storage trays
- Gunwale rod holders
- Rocket launchers on hardtop
- Bow and stern handrails
- Hardtop handrails
- Rear cabin handrails
- Navigation and mast lights
- Transducer mount bracket
- Two-tone paint
- Marine driver seat
- Navigator seat
- LED cabin light
- Sliding window
- Electric wiper
- Switch control panel
- Cushions
- Offshore hatch
- Under-floor storage tank
- Battery
- Centre console — available as a separate layout
- Cabin door
- Folding table
- Hydraulic steering
- Carpeted cabin
- EVA teak floor
- Upgraded damping seat
- Marine compass
- Wash-down pump kit
- Anchor chain & rope
- Electric anchor winch
- Marine toilet
- LED deck light
- LED search light
- Fusion sound system
Dealer-fitted packages — electronics, trailers, stabilisation and trolling motors — are listed below. A commercial survey build has to be requested before construction starts and is quoted separately.
Available Layouts
This hull is also available as: Centre Console · SportsCab.
Engine & Power Options
- Single outboard packages to the recommended horsepower — e.g. Mercury V10 Verado class — supplied, fitted and water-tested
- Twin outboard transom configuration for offshore redundancy and performance
- Joystick docking, station-keeping and autopilot with compatible twin setups (e.g. Yamaha Helm Master EX)
- Hydraulic steering, or an electric steering upgrade
Electronics & Navigation Packages
- Garmin electronics package — Echomap Ultra 2 105SV, Echomap Ultra 2 125SV or 125SV with GT56 transducer combo, fitted and commissioned
- Simrad electronics package — specified to suit your boat, fitted and commissioned
- Radar and antenna package with hardtop radar mount
- Autopilot integration (NMEA 2000)
- Fusion marine audio package — Apollo MS-SRX400 zone stereo, 330W chrome speakers with LEDs, 6-channel 1500W amplifier or Signature Series 12″ subwoofer
- Sionyx marine night vision camera (Garmin-integrated)
Trim & Stability Options
- Lenco 9″×12″ trim tab kit with Pro Control assist
- Zipwake KB300-S dynamic trim control system
- Seakeeper Ride 450 underway stabilisation — eliminates up to 70% of boat roll
Comfort, Deck & Fit-Out Options
- Trolling motor package — bow mount plate, extended bow rails, trolling motor and lithium battery system
- Underwater LED transom lights (set of 4)
- 12V fridge slide-out with dedicated power
- Permanent freshwater tank with deck wash
- Side access door
- Driver and passenger roof hatches
- SeaDek/EVA flooring — your choice of colour and pattern, including bow, gunnel and hardtop coverage
- Two-tone paint — your choice of colour scheme at order time
- Savwinch stainless electric anchor winch package with anchor, chain and rope
- Built to commercial survey — must be requested at order time, and cannot be added to a boat already built as recreational
Trailer Packages
Trailer rating is matched to your finished boat weight, not just the hull, so we specify the right one with your build. Contact us on 07 3477 9338 and we will size it for you.
- Galvanised trailers: 5.7m tandem ATM 2000kg
- Aluminium trailers: 6.9m, 8.2m — electric brakes available
Warranty
Every Sea Raider comes with a 5-year hull warranty and a 6-year warranty on the outboard motor. Third-party components (electronics, trailers, accessories) carry their own manufacturer warranties. Contact us on 07 3477 9338 for full terms.
Frequently Asked Questions (FAQs)
1. What size outboard engine is recommended for the 7.5m Pro Fisher?
The hull is rated for 250hp to 350hp. A single outboard suits most owners, and a twin outboard transom configuration is available where you want offshore redundancy.
2. Is the price for the 7.5m Pro Fisher inclusive of a motor and trailer?
No, the listed price is for the boat hull only. A motor and trailer can be added as optional extras and customised to suit your boating needs.
3. Is the 7.5m Pro Fisher suitable for offshore fishing?
Yes. With its hull size, deep-V design and heavy-duty marine-grade aluminium plate construction, it is built for offshore conditions and extended fishing trips.
4. What fishing features are included as standard?
Standard features include gunwale rod holders, rocket launchers, a 45L live bait tank, a self-draining deck, anti-slip flooring, handrails, LED navigation lights and a bilge pump, making the boat fishing-ready from day one.
5. Can the boat be customised with additional features or upgrades?
Absolutely. You can add optional upgrades such as hydraulic steering, electric anchor winch, deck wash system, marine toilet, EVA teak flooring, trim tabs and electronics packages.
6. What materials are used in the construction of the 7.5m Pro Fisher?
5083 marine-grade aluminium plate — 6mm bottom, 5mm topsides, 6mm transom — with a foam-filled hull for added buoyancy, giving strength, durability and corrosion resistance for long-term use.
7. Can this boat be built to commercial survey?
Yes — a commercial survey build can be ordered, but it has to be requested before construction starts and is quoted separately. It cannot be added to a boat that has already been built as a recreational vessel. See our boat survey guide for what that involves, including hire and drive (Class 4) operations.
8. Where are Sea Raider boats built?
Our boats are proudly assembled and finished here in Australia. The hulls are manufactured overseas by a trusted partner, and everything else — trailer assembly, motor installation, electronics and full fit-out — is completed locally by our team to meet Australian standards, including full compliance, registration and quality control.
9. What warranty do Sea Raider boats come with?
Each boat comes with a 5-year hull warranty and a 6-year warranty on the outboard motor.
10. Where can I view or test drive a Sea Raider?
We are based at Cleveland Marina in Queensland and regularly have boats available to view and test drive — contact us on 07 3477 9338 to arrange a time.
11. Do you deliver interstate?
Yes — we deliver Australia-wide. Interstate freight is quoted per delivery (for example, transport to WA is approximately $6,500 including cradling, insurance and road freight). Queensland packages include boat and trailer registration; interstate registration is arranged in your home state and is not included.
12. Do you accept trade-ins?
Yes, we accept trade-ins. Send through some photos and details of your current boat and we’ll take a look.
13. What are the current lead times?
Custom orders are typically 2–3 months. We usually have stock boats available for immediate pickup, and as a transom partner we can install a motor in roughly 1–2 weeks.
14. Is finance available?
Yes — boat finance is available through our finance partner. Ask us and we can guide you through the options.
15. Can I insure the boat through you?
Not directly — Sea Raider is not an insurer — but our insurance partner, New Wave Insurance, quotes and issues boat cover online, and no survey is needed on a new boat quoted online. See our boat insurance page. Sea Raider may receive a referral fee if you take out a policy.
| Attributes | Value |
|---|---|
| Hull Length(m) | 7.50 |
| Length Overall(m) | 7.90 |
| Beam (m) | 2.45 |
| Depth(m) | 1.45 |
| Bottomside Thickness(mm) | 6 |
| Topside Thickness(mm) | 5 |
| Transom Thickness(mm) | 6 |
| Transom Shaft(Single Engine) | 25″–35″ |
| Dry Weight(kgs) | 1700 |
| Fuel Tank(L) | 350 |
| Min. HP | 250 |
| MAX. HP | 350 |
| Person Capacity(Max) | 8 |
| Warranty | 5 years (hull) |
Absolute weapon on the water, build quality (you can't fault it), My opinion is to get a walk through transom with bench seat and extra low lying live bait tank. As per a Profisher model. Get all their gear/ options as it is high quality. Definitely recommend.
I had several quotes locally in Victoria for an aluminium trailer for the 7.5 Profisher and even with the fee to assemble the trailer and upgrade it the local trailers were over double the price.
My mate had 150, was great. Mines got 200, is great. Both great. Only thing to be mindful of is the difference in weight makes the transom sit a little lower in the water
The welds look better than some of the big brand boats____
Awesome boat, suspension seats and a good electric anchor is a must. I wish i had made a walk through transom. Enjoy __.
You know they supply military vessels and commercial vessels right? That they produce currently 800 boats a year worldwide? Their welders are all certified they use only fronius double pulse synergic welders and company's are on a continuous path of improvement. Then the kicker! The price ex factory wow
Seen them 20 km out cutting through the water nicely they are a great boat nice ride and great prices.
Will have mine one in a month ! Excited to see how it will perform
What a beast very nice.
the bar crusher is a toy next to the profisher.
805 wildseas with 250 Suzuki... Was an awesome rig... Handled it all with ease... Just needed more HP... Is actually up on boat sales for sale.
Related products
15m+Yacht
$299,000
6.25mBowRider
$38,160
6.25mPro Fisher
$38,160
6.25mSportsCab
$38,160
6.85mPro Fisher
$59,760
Recommended products
Boat Wrap
$5,000Large Boat Sticker Pack – Abstract Geometric Multi-Metre Marine Decals
Original price was: $2,500.$2,400Current price is: $2,400.
Fusion 330W Marine Chrome Speakers w/ LED’s
$499
Fusion Apollo MS-SRX400 Marine Zone Stereo With Built-In WiFi
$558
Fusion Signature Series 6 Channel 1500 watt Marine Amplifier – SG-DA61500
$840
Fusion Signature Series Marine Subwoofers 12″ 1400-watt
$1,136
Garmin Echomap Ultra 2 125SV 12″ Chartplotter Black
$3,999Garmin Echomap Ultra 2 12in 125sv with GT56 Combo
Original price was: $4,999.$4,299Current price is: $4,299.
Lenco 9″x12″ STD Trim Tab Kit w/Pro Controlâ„¢ Assist
$3,860
ZipWake Dynamic Trim Control System KB300-S
$3,899
